The TVH.2691 Thermostatic valve features ¾” NPT female connections and has 2 water outputs [ports] (one for the tub spout and one for the handheld). Both water outputs are operable simultaneously, i.e both at the same time, or one at a time. The middle handle sets the temperature. The left handle controls output port 1 and the right handle controls output port 2. Each port has full volume control capability. The installation of the spout and handheld shower outlets are interchangeable.

SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.

HANDLE OPERATION – The middle handle is used to control the temperature of water flowing through the outlet. The left handle controls the volume of water from full flow to a trickle for the output port 1. The right handle controls the volume of water from full flow to a trickle for the output port 2.

ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full hot position, as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.

VALVE INSTALLATION - As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.

CUT OUT DIMENSIONS – The cut out in the wall should be 16.41” X 1.85” which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut out hole in the wall.

TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.

Collection	Serie 100
Item Category	Bathing
Item Sub Category	Wall Mount Tub Faucets
Item Sub Sub Category	3-Handle Wall Mount Tub Faucets
Style	Contemporary / Modern
Warranty	Limited Lifetime Warranty. See Warranty page for complete details.

Product Docs:

Spec Sheet

Parts Diagram

Installation Docs

Installation Video

Product Info:

Connection Size	3/4" Female
Integrated Volume Control	Yes
Valve Included	Yes
Valve Type	Thermostatic
Installation Type	Wall Mounted
Extensions Available	Yes
Material	Brass
Anti-Scald Ring	Included
Supply Stops	Included
Temperature Cartridge	TVH.4201-9853
Volume Control Cartridge	TVH.4511-9853
Tub Spout Flow Rate	8.0 GPM @ 60 PSI
Hand Shower Flow Rate	1.75 GPM @ 60 PSI
Check Valve	Included
Back Flow Prevention	Included
Material	Brass
Valve	Included
Handles	Included
Number Of Handles	3
Anti-Scald Feature	Included
Hose	Included
Spout Reach	8.8"
Handle Style	Knob

Available Finishes:

Model#	Finish	List Price
100.2691CP	Chrome	$1449.0
100.2691BN	Brushed Nickel PVD	$1523.0
100.2691MB	Matte Black	$1545.0
100.2691SB	Satin Brass PVD	$1523.0