The TVH.2715 Thermostatic valve features 3/4” NPT connections and has 2 water outputs [ports] which are operable simultaneously, i.e both at the same time, or one at a time. The middle handle sets the temperature. The left handle controls output port 1 and the right handle controls output port 2. Each port has full volume control capability.

SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.

HANDLE OPERATION – The middle handle is used to control the temperature of water flowing through the outlet. The left handle controls the volume of water from full flow to a trickle for the output port 1. The right handle controls the volume of water from full flow to a trickle for the output port 2.

ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. In order to adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.

VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77 and 3.44 inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.

CUT OUT DIMENSIONS – The cut out in wall should be 2.08 X 12.48 Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.

TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.

Collection	Serie 196
Item Category	Showering
Item Sub Category	Shower Faucets
Item Sub Sub Category	2-Output Shower Faucet
Style	Contemporary / Modern
Warranty	Limited Lifetime Warranty. See Warranty page for complete details.

Product Docs:

Spec Sheet

Parts Diagram

Installation Docs

Installation Video

Product Info:

Connection Size	3/4" Female
Integrated Volume Control	Yes
Valve Included	Yes
Valve Type	Thermostatic
Installation Type	Wall Mounted
Extensions Available	Yes
Material	Brass
Anti-Scald Ring	Included
Supply Stops	Included
Temperature Cartridge	TVH.4201-9853
Handle Style	Knob
Volume Control Cartridge	TVH.4511-9853
Flow Rate	8 GPM @ 60 PSI
Output Ports	2

Available Finishes:

Model#	Finish	List Price
196.2715CP	Chrome	$1214.0
196.2715BN	Brushed Nickel PVD	$1287.0
196.2715PN	Polished Nickel PVD	$1287.0
196.2715MB	Matte Black	$1337.0
196.2715SB	Satin Brass PVD	$1337.0
196.2715SG	Steel Grey	$1554.0
196.2715GMG	Gun Metal Grey	$1554.0
196.2715CR	Crimson	$1554.0
196.2715GW	Gloss White	$1554.0
196.2715SKB	Sky Blue	$1554.0
196.2715BP	Blue Platinum	$1554.0
196.2715GB	Gloss Black	$1554.0
196.2715NB	Navy Blue	$1554.0
196.2715LG	Leaf Green	$1554.0
196.2715DG	Dark Grey	$1554.0
196.2715AG	Army Green	$1554.0
196.2715LV	Light Verde	$1554.0
196.2715DR	Deep Red	$1554.0
196.2715VB	Vortex Brown	$1554.0
196.2715IG	Isenberg Green	$1554.0
196.2715LT	Light Tan	$1554.0
196.2715RG	Rock Grey	$1554.0
196.2715DGR	Dark Green	$1554.0
196.2715DT	Dark Tan	$1554.0